   Copyright (c) 1991 - 1999 Digi International. All Rights Reserved.

                SCSI Term Server 1400B Release Notes

                            08/09/1999

Table of Contents
-----------------
Firmware Package Contents
Firmware Update Instructions for NT
Firmware Update Instructions for UNIX
Revision History


Firmware Package Contents (p/n 42000524 rev B)
----------------------------------------------
readme.txt    p/n 93001268 rev B
st1400b.prm   p/n 82000542 rev B


Firmware Update Instructions for NT
-----------------------------------
To update the firmware, use the "Update STS Firmware"
item located in the "Digi International Port Server"
folder.


Firmware Update Instructions for UNIX
-------------------------------------
To update the firmware, use the "cdupdate" utility
supplied with the host driver.

AIX users will need to use SMIT.  Start SMIT with
"smit stsdd_srv".  Select "Download Firmware to a
scsiServer" and follow the instructions.


Revision History
----------------

This revision history applies to both the SCSI Term Server
and EtherLite product lines.


08/09/1999 - v7.2

    - Added support for ST Micro and Micronix flash EPROM
      devices.  (All products)

    - Corrected a problem with TCP error recovery.  The unit
      would recover, but after a possibly long delay.
      (All EtherLite products)

    - Corrected a problem with network retry limit error
      handling.  Garbage packets may be sent, or in rare
      cases, the Ethernet controller may lock up.  
      (EL-2, EL-8+, EL-16, EL-32)

07/01/1999 - v7.1

    - Added support for new the EL-2-EIA485 product.

    - Firmware was modified to disable automatic flow control
      modes when the host disables a port.  (EL-2, EL-160, EL-162
      ST-1002S, ST-1008S, ST-1400B, ST1800B, ST-1616B)

10/30/1998 - v7.0

    - Initial Digi International Release.


